T 06

Electrical safety


 
PTL Temperature Measuring Board
to measure the temperatures in the bases or in the fixing surfaces for appliances and luminaries in operation
according to IEC 60335-1 :2006-09 11.2 and 11.3.
Standard Outfit:
1 Plywood board, 20 mm thick, with frame on all sides and with covering board at the lower side, together approx. 150 mm thick, with 4 feet,
1 set Measuring Points consisting of:
Copper Disks, diameter 15 mm, 1 mm thick, embedded at distances of 50 mm x 50 mm in the plywood board,
and Fine-wire Thermocouples nickelchromium-nickel (NiCr-Ni), soldered to the back of the copper disks, thermoelectric wires with a diameter of 0.3 mm, insulated with glass-silk or similar temperature resistant material,
1 set of change-over switches to select the lines resp. rows of the copper disks, to connect the selected copper disk with socket-outlet or temperature indicating instrument,
1 socket-outlet, two-pole, almost free of thermoelectric voltage, plug with cable of nickelchromium-nickel, length 1.5 m, for the connection of a external measuring instrument,
1 temperature indicating instrument supplied by battery, and switch to select instrument or socket-outlet.
Design:
Plywood board, frame and copper disks varnished dull black, copper disk lines and rows marked.
Most Temperature Measuring Boards are tailor-made, the following Article Nos. are examples.
Measuring area
in mm x mm
Copper disks
lines x rows = quantity
Article No.:
351 x 650 7 x 13 = 91 T 06.09
500 x 750 10 x 15 = 150 T 06.15
700 x 900 14 x 18 = 252 T 06.25
850 x 1 150 17 x 23 = 391 T 06.39
 
Click here for prospectus as PDF 
T06003e109 2010-05-07 2010 PTL Dr. Grabenhorst GmbH, Stadtsteinach, GERMANY